How to install Hybrid SPC Flooring

To install click system hybrid flooring, you will need the following tools and materials:

1. Measuring tape
2. Underlayment
3. Hybrid flooring planks
4. Tapping block or pull bar
5. Mallet

Steps:

1. Prepare the subfloor by ensuring it’s clean, flat, and dry
2. Roll out underlayment and cut to size
3. Measure the room and calculate the number of planks needed
4. Start laying the first row by aligning the tongue and groove of the first plank
5. Secure the first plank by tapping it into place with a tapping block or pull bar and mallet
6. Connect the remaining planks in the first row using the click system
7. Repeat the process for subsequent rows, making sure to stagger the end joints
8. Trim the final row to size if necessary
9. Allow the flooring to acclimate to the room for at least 24 hours before using.

Note: Always refer to the manufacturer’s instructions for specific guidelines and recommended tools.